Eastland High Strength AAC Floor Panel (Load-bearing)

Manufacturing of EASTLAND AAC (Autoclaved Aerated Concrete) involves mixing cement, sand, lime and water, with an aluminium paste expanding agent. The mixture is poured into large moulds, filling to about two-thirds of the mould height. Upon contact, the expanding agent reacts with the other ingredients through a chemical reaction that creates small, finely-dispersed air bubbles. The resultant expansion causes the mix to rise within the mould to the full height.

The moulds are then pre-cured in a heated environment for 18-24 hours.  The resulting semi-solid material, still in a green state, is then transported to a cutting machine where it is sliced into panels of desired sizes.  Subsequently, the sliced panels or blocks undergo steam pressure curing in autoclaves for up to 12 hours where the final hydration of the cementitious mix occurs.

The combination of the expanding chemical reaction and the autoclave process confers upon EASTLAND AAC its distinctive lightweight properties. EASTLAND AAC exhibits exceptional thermal insulation and acoustic absorption capabilities, along with superior fire resistance and termite resistance. It conforms to relevant building codes and offers ease and efficiency in handling. EASTLAND AAC stands out as a versatile and cost-effective building material, meeting diverse demands better than alternatives due to its physical and mechanical properties.

Note: Other special sizes of panels and blocks can be ordered as per clients’ requirements.

Benefits of using Eastland AAC Floor Panel (Load-bearing) in your next project include:

1. Superior Thermal Insulation

   Thermal conductivity better insulation than regular concrete; stabilizes indoor temperature and cuts energy consumption.

2. Fire resistant & non-combustible

   Inorganic non-combustible material; passes fire-resistance test, no toxic fumes, fully compliant with international fire standards.
   

3. Excellent Acoustics

   Built-in uniform micro air pores form sound-absorbing layers; 100–240mm thickness offers 40.5–48.5dB sound insulation, creating quiet indoor spaces.
   

4. High Structural Strength & Anti-Seismic

   Reinforced with anti-rust steel bars; tested by top universities, excellent anti-seismic performance, safe for long-term use.
   

5. Fast construction

   Dry construction, pre-cut sizes, shorten construction period greatly.
   

6. Efficient & low-cost construction systems

   Only 1/5 of ordinary concrete, significantly reducing building deadweight, foundation & frame costs, and soft-ground construction difficulty.

7. Weather & Freeze Resistant

   Low mass loss, high strength retention, good waterproof performance.

   
   

1. Packing: Reinforced wooden pallets, foam cushioning, waterproof PE film, steel strapping to prevent impact, moisture, and breakage.

2. Loading: Optimized for 20FT and 40HQ containers to minimize shipping cost.

3. Transport: Sea freight for bulk orders; air freight or international express for samples.

4. Lead Time: 7–10 working days production; 15–35 days to major Australian ports.